The service acoustic calculation is an opportunity to achieve the perfect sound in any room and on an open area, with minimal investment in finishing, and with the correct selection of acoustic systems and their placement.
The service acoustic calculation is an opportunity to achieve the perfect sound in any room and on an open area, with minimal investment in finishing, and with the correct selection of acoustic systems and their placement.
The service acoustic calculation is an opportunity to achieve the perfect sound in any room and on an open area, with minimal investment in finishing, and with the correct selection of acoustic systems and their placement. The most important thing in every sound equipment project is to make the right choice of loudspeakers. Therefore, we recommend during the design of the audio system to perform the acoustic calculation of the site.
The process usually consists of the following stages:
- Architecture analysis. According to drawings, samples and sections, an acoustic engineer analyzes the room - geometry, decoration, places where it is possible to install loudspeakers. These parameters affect the acoustics of the hall. Based on the data obtained, they find an ideal place for the installation of acoustics.
- Measurements of the room. Sometimes inspection of documentation is not enough – the expert needs to go to the selected object. Inspection of the room allows the sound engineer to identify the necessary details for further design of the sound system.
- Identifying reverberation time. Each room has its own reverberation time. For accurate calculation, specialists in the room with the help of special equipment measure the time of reverberation at different frequencies, the result of which is entered into the program for acoustic calculation. Following this scheme, the opportunity to make a high-quality voiceover of the hall is significantly increased.
- Acoustic calculation in the program. After identifying all the necessary parameters, a special three-dimensional model of the hall or open area is created. The real value of the reverberation time is established using the past analysis and wall cladding. After entering all the parameters of the room in the three-dimensional model, acoustic systems simulators are installed, which have the characteristics of a real acoustic system. The database of acoustic systems in the EASE program is always updated, as well as there is an opportunity to edit the characteristics and use the equalizer or crossover in frequency. Geometric coordinates can be changed as well as when installing systems: in height and inclination. As a result, a picture is displayed where all the necessary parameters are indicated, according to which you can edit the project, make changes.
- Buying equipment. Only after performing acoustic calculation is selected sound equipment – loudspeakers, subwoofers, power amplifiers and other sound technology. In the incorrect acoustic properties of the halls it is necessary to perform sound absorption, special materials for this also choose acoustic engineers after performing acoustic calculation.
By the way, to make the correct acoustic calculation yourself will not work – here you need special knowledge not only the program for calculating acoustics, but also experience. We recommend you to contact our engineers - Verdamare +386 69 66 52 45. Our specialists have already performed various projects on voiceover: concert venues, nightclubs, stadiums, open areas, Temples. Selection and installation of sound equipment.
